Monday, September 15, 2008

Some more thoughts on the Crown Wheel

This evening I was going over some photos a friend had taken of the Salisbury Cathedral Clock  for me about a year ago.  In looking at the photos, there was a technique used for attaching the outer ring of the Crown Wheel to the spokes.  I think I may adopt this techinque because it makes a lot of sense and is a lot easier.  Essentially, on the back side of the Crown Wheel, four squares are cut out and then the spokes and hub are just dropped in from the back.  Then, the spokes are riveted over.  These two pictures show this.  Click on them to see a larger view.

salisbury2 salisbury1

This makes a lot more sense then what I was trying to do.  I wish some better pictures of the specific clock that I am modeling.  The only photographs I have are photo copies of a BW photo.

There is one minor problem with using this Crown Wheel as a source.  The original clock's Crown Wheel is lost to history and this one is actually a reproduction.  However, it makes sense and I am going to go this route.

 

5 years ago...

  I just happened to notice today that I have now been using this site for 5 years (joined September 14, 2003 and first post on October 31st, 2003).  And what that means is that I've been working on this project off and on over the past 5 years.  I've gone through periods of a lot of progress and learning and I've also gone through periods of inactivity that can last close to 4 or 5 months.  It has been a very challenging, frustrating but yet rewarding project.  Having said that, I really hope it doesn't take another 5 years.

Sunday, September 14, 2008

Finally

Well work has finally slowed down that I can start looking at putting some serious work in on the clock.  Also it is starting to be blacksmithing season.  During the months of May-September, things get very uncomfortable in Florida.  Between daily rain storms and 90+ temperatures, it is a steam bath.  Well things are starting to cool off.

I was going to do some work today but I noticed that my tools needed some attention.  Because of the demos I do on the road and my erratic work schedule, they needed some attention.  So I decided rather than jumping right back into it to take the time and do some basic maintenance and repair.

The bad:
  About 1/3 of my files were exposed to too much moisture at some point.  They will be recycled into some other project, perhaps knives or fire starters.

  The tool boxes I made about 2 years ago for demos just are not cutting it.  I made them quickly (3 of them in 2 hours) and because of a simple mistake, they always left the tools slight exposed to the elements.  Also, they are not specific to the tools they are carrying.  I hope to remake them to have boxes specific to the drifts, chisels, punches, hammers, files, tongs, etc...

  Several of the chisels, punches, etc... need some attention.  I may do some work on those yet this afternoon.

The good:
  I had a lot more punches, chisels and drifts then I thought and in a lot more variety.

  I was able to clean up a lot of my files and get them wrapped up in an oil cloth so that will hopefully stop any rusting.

  I put new handles on two of my hammers and have them soaking in a linseed oil bath.  I've talked to a few smiths online and they recommended soaking any hammers in linseed oil after putting a new hammer handle on them.  The linseed oil fills the voids, swells the wood (tight fit to the hammer head) and prevents them from drying out.  I have them in a mixture of 75% linseed and 25% mineral spirits.  The mineral spirits thins the linseed and helps it to penetrate the wood.

  I was able to clean up my work setup to make things quicker and nicer.  Hopefully during this week I will get some work in.

********

  Finally a note on the actual clock!!!  When I last left the clock, I had done a fair amount of work on the crown wheel.

CrownWheel10

  Although it may look okay, there are some balance, symmetry issues.  I think I will try to make this in a different way.

  In the first technique, I took a straight piece of metal and cut the teeth.  I then wrapped that into a circle.  Next, I made the spokes and hub to insert into the crown wheel.  This was very difficult to get inserted properly.  Part of the problem is that in the process the wheel got a little out of whack.  It is difficult to get it back into shape without damaging the teeth.

  I think this time I will start with just a straight piece of metal.  This will be wrapped around the spokes and hub then welded closed.  After that, I will true up the circle on the axle.  Once I have that trued up, i will then cut the teeth.  In other words, I going to get the circle true before I cut the teeth.  And that really makes sense now that I think about it.  Any gear on the clock needs to be a true circle prior to the gears getting cut.  It is only common sense but that is part of the learning process.

Tuesday, September 2, 2008

Some good forge time

  I spent a fair amount of time on the forge this weekend.  Nothing to do with the clock.  It was mostly work related to a primitive fire starting class I taught several times over the weekend.  Still, it felt good to get back to work and hopefully over the next few weeks I can get back into doing some more work.  At the very least, I expect over the next few months for work to really settle down.

Thursday, August 28, 2008

Finally, some forge time

  The past few months have not been fun.  Way too much work, way too little time.  But, I finally got back out to the forge.

  It really wasn't that exciting.  This weekend I am teaching some classes including a fire starting class.  As part of that class, I am giving out fire starting kits.  So this afternoon I started forge some basic fire starters.

  I am really glad that I didn't work on the clock.  Because I haven't been doing any work on the forge, my muscles were out of shape.  It didn't take much for me to get tired.

  This weekend I will be doing some smithing as well but probably won't be able to get to the clock.

Monday, August 4, 2008

I promise, something new soon...

  Work sucks...  I can't go into too much detail here because I don't want to get into trouble but my company has been preparing for a possible strike and I've been in the middle of those strike preparations.  It hasn't been fun and it has kept me busy.  But it looks like things are very close to be resolved so hopefully I will be doing more here soon.

  Anyway, the only real news to post it that I have begun to assemble materials to make a set of bellows.  Right now for my forge I use a hand crank that is about 100 years old.  I've been wanting to make a set of bellows for some time.  I have mostly wanted them for when I do historical demos.  It is hard to look like you are doing something medieval when you have a 20th century hand crank.

  So I picked up some duck cloth for the bellows yesterday.  The canvas will take the place of leather.  I'm using canvas instead of leather for cost, maintenance, simplicity, etc...  The bellows that I am making will be about 5 feet long by 3 feet wide.  They will be a style of bellows known as double lung.  Although this style is more colonial than medieval, the average observer won't know this.  I am using this style because the true medieval style works best when you have a second person working the bellows and they tend to "puff" more.  In other words they alternate puffing and not puffing much like a set of fireplace bellows.  The double lung bellows tend to give a more constant stream of air.

  I hope to start providing real updates soon.  This has been a very frustrating stretch for me.

Monday, June 30, 2008

Hopefully some work soon...

Still alive...  Unfortunately over the past few months, work has been extremely busy.  I have had very, very little personal time and what little time I do have usually coincides with the afternoon rainstorms.  For those not from Florida, during the summertime we get rain almost everyday at about 4-5PM.  Since I work outside, this prevents me from working.

Anyway, I hope over the next few weeks that there will be a bit of a slow down and that I can get back to some work on the forge.