A quick update...

I've been very delinquent about keeping things up to date.  I do have some photos to share which I will try to get to this week.  Some of the update highlights.

I did make an attempt to remake the one part I mentioned in previous post.  However due to the forging process a stress crack was introduced to the tenon.  It occasionally happens but it also happened on the previous piece so I obviously need to change the process.  I decided to scrap the piece and make another attempt.  I had to also address another issue though.

A frequent techinique in blacksmithing is to have one smith hold a tool on a piece while the other smith holds the piece and hammers the tool.  In other words, a two man job.  In any real blacksmith shop of the middle ages you would have had multiple people to call on for just such a thing.  For me, that is not an option.

I decided to go ahead an make an investment and purchase a tool known as either a Smithing Magician or Guillotine depending on who you talk to.  It essentially acts a second hand to hold a tool in place.  I ordered it last week and it arrived on Wednesday.  I wasted no time and got to work with it to attempt to make the part once again.  Things went much smoother and faster using the tool.  It was a worthwhile purchase.

Anyway, I changed how I was making the piece to avoid getting another stress fracture.  I still got one though but I think I understand the issue.

What it really comes down to is if I am doing heavy forge work on a piece, there cannot be a thinner piece that is holding the weight of the piece.  Its hard to describe and will have to wait on me to upload a few photos.

Trying to keep things moving....

 

Working on clock again

 After a very long hiatus, I am finally back to working on the clock.  I've actually had several sessions just not posted here about it.  With trying to get back to the clock, I wanted to make sure I had some good momentum before I put anything here.

What I worked on yesterday and today is the armature that holds the verge and foliot.  I completed this about 2 years ago now but with going back to the clock, I am looking at what need to make better and it is an ideal candidate.  Everything about this clock stems from this part.  If this part is not correct, everything else fails.

I did not take a picture of what I'm working on tonight, but this is the part I made two years ago.



It is the part the is on top of the clock that the string is hanging off of.  So what's wrong with it?  It leans slightly to one side, the rivet on the bottom portion of it is off center (not very clean) and the long upright piece is a bit loose.  In all honesty, it could work.  However, I've discovered in the past on other projects and this project as well that the mistakes don't just add up, they multiply.  The more incorrect one piece is, the less margin for error on the next piece.  I don't want to get way to far along and discover that it won't work or that I spend hours and hours to get it to barely work.

So, I am starting over on the going train (time keeping side of the clock.).  Although this means a lot more hours, each time I do these parts it goes faster and faster so I'm not too worried.

Here's hoping I can keep it moving.

More progress on camping gear

Worked some more on the commission piece for camping gear.  Taking a little more time because of me being out of shape for extended smithing and because of the thickness of the pieces.  Since this camp set will be capable of cooking for large numbers, I had to use 3/4" stock for the legs.  The legs are now shaped except for the feet.  For the feet I am reproducing the medieval version with split spikes designed to go into the ground.

Next time I get out to forge, I will try to get some photos to post.

Quick blacksmithing update

Trying to keep things going.

  Did some more work with blacksmithing today.  It was mostly a day to fix a few tools and equipment.  Not very exciting but it needed to get done.  My weekends are pretty free for the next few months so hope to use that to build up momentum to getting back to the clock.

Too long away from forge

Today marked a bit of a milestone.  I finally dragged the forge out at home.  I've been doing demos and such but not at home.  With my job change I unfortunately got out of the habit of doing smithing.  So today I finally fired up the forge at home for the first time in a very long time.

Since I know that I am out of practice, I decided to help me get back in the groove I would focus on making some needed tools.  So I started with a pair of tongs to hold round bar vertically.  I was able in just a little over an hour get the basic shape done and get the handles welded on.  I had to stop due to the sun setting but I don't have that much left to do.

So if I can get myself back into the habit, I'd like to spend the next few weekends geting back into the habit and working on tools.  Then I need to finish up a camp set and a few other minor projects.  I would like to get back to the clock around April when it stays light long enough that I can work after I get home from work.

It is Welsh you know....

  I am trying to get back to the blacksmithing especially with the end of summer in sight.  Blacksmithing in Florida during the summer is really, really draining.

  Today I decided to play a bit more with doing wings.  Since I've decided for the project that I am doing that I want Welsh dragons, I switch gears a bit and went for more of a dragon wing style than a bird wing style.  As a reminder, I am doing something similar to the Bok Tower gardens gates.

  So after playing around for just about an hour, the proof of concept game out pretty decent.  It doesn't look that great in this photo because I was rushed by the setting sun.  Since the test game out pretty good, I am going to try a more careful test later this week.  It is hard to see because of the lighting, but there are some well defined ribs.  I may go for a slightly wider piece so that I can add a rib to the wing.  Also, I am going to make some specialized fullering tools to help with the forming.

Still alive...

Just let me blow the dust off of this thing...

Finally got back to forge work after a many month hiatus.  I won't go into all of the reasons I was away but the biggest was getting married.

So, dragged the forge out today even though it was too hot.  Cleaned some rust off of the anvil and fired up the forge.  Since it has been so long since I've worked, I decided to take it a bit easy today and just do some basic stuff.  Started with making a new fire starter since I couldn't find my old one.  Nothing more than a piece of steel made from a file and used to start fires in a less modern way.

Inspired by a visit to Bok Tower, I decided to play around with making an animal head for a project that I am working on for a friend.  So this afternoon I worked on a wing to see if I liked the results.  Still working on it (in fact, plan to head back out) and I will post pictures of it if I like the results.  In the meantime, here is an example of the original.  Notice the tower in the back ground.  They are fairly basic and after a bit of toying around, I should get it.